15
No. 99MBC139A
2 Setup
■When linking multiple EJ Counters together
When using multiple EJ Counters that are linked together, use ground plates to allow them to share a
common grounding.
1
Remove the ground terminal screw.
2
Put the removed screw through the hole in the ground plate and loosely attach the ground
plate to the ground terminal.
3
Loosen the ground terminal screw on the adjacent EJ Counter and hook the notch at the end of
the ground plate over the screw.
4
Repeat steps
1
through
3
to attach ground plates to other linked EJ Counters.
5
Tighten the ground terminal screws on all of the EJ Counters.
To Next Page
Loading...
