Mitutoyo EJ-102N - Page 45

31
No. 99MBC139A
3 Operation Procedure
3
Change the set value.
The set value of the displayed Parameter Number
changes each time you press the [P.SET] (^) key.
MODE
Fn
SEL / CE
Ch.
TIR
P.SET
Parameter Number Set value
Tips
• For settings that have two digits, you can move between digits by pressing the [MODE] (>) key.
• The set value can be decreased by pressing the [P.SET] (^) key together with the [Fn] key.
4
Press and hold the [Fn] key, and then press the [MODE] (>) key.
» The setting is applied.
» Display enters the counter display screen.
MODE
Fn
SEL / CE
Ch.
TIR
P.SET
1
■Setting parameters by external input
The EJ Counter's parameters can also be changed by external input through the optional interface unit.
Tips
For details, see the separate "Interface Unit User's Manual ".