Mitutoyo ID-C112GXB - 1.5 Specifications

No. 99MAH040B
1
-
5
1.5 Specifications
Model name *1 ID-C112GXB ID-C112GMXB ID-C112GEXB
Code No. *1 543-310B 543-311B 543-312B
Resolution *2 0.001 /0.01 mm 0.00005/0.0001/0.0005 in // 0.001/0.01 mm
Measuring range 12.7 mm 0.5 in / 12.7 mm
Error of indication for the
total measuring range
MPE
E
*3
0.003 mm
±0.0001 in / 0.003 mm
Hysteresis MPE
H
*3 0.002 mm 0.0001 in / 0.002 mm
Repeatability MPE
R
*3 0.002 mm 0.0001 in / 0.002 mm
Stem diameter
φ8 mm
3/8 in DIA
Contact point
Carbide
(M2.5x0.45)
Carbide
(No.4-48UNF)
Measuring force MPL ≤1.5 N
Measuring direction Useful in all directions
Protection level *4 IP42 (in factory shipment state)
Power supply
Lithium battery CR2032 ×1pc.
Battery life *5 Normal use :Approx. 1 year
Scale Electrostatic capacitance absolute encoder
Response speed Infinite
Measurement
frequency *6
Normal mode: 10 times/s
Minimum value detection mode: 50 times/s
CE marking
EMC Directive: EN 61326-1
Immunity test requirements: Clause 6.2 Table 2
Emission limit: Class B
RoHS Directive: EN IEC 63000
Operating temperature
0 ℃~40 ℃
Storage temperature -10 ℃~60 ℃
Net weight 170 g
*1：All instruments in this series are of the flat-back type.
*2：Changeable by way of setting. Refer to “3.3.2 RES : Resolution”.
*3：20°C, normal measurement.
The values are calculated with the resolution set to 0.001mm.
*4：The protection level (IP: International Protection) is indicated according to IEC 60529 and JIS C 0920
standards.
*5：Battery life depends on use of the indicator. Use the above value as a guide.
*6：If the spindle speed exceeds following, the correct peak value may not be displayed.
Normal mode: 10µm/s
Minimum value detection mode: 50µm/s