No. 99MAH040B
3.2.2 Numerical value Editing
Numerical value for "Preset", "Tolerance judgment" can be edit by same key operation.
Items that requires numerical value editing
●Moving signs (+/-) and digits
Press the center key to move the sign or digit.
●Changing signs (+/-) and numerical values
Press the lower left key or lower right key to change the sign (+/-) or numerical value.
For signs (+/-)
Press the lower left or lower right key to switch the signs "+” ⇔ “-".
For numerical values
Pressing the lower left key, the display changes in the following order:
0→9→8→… →1→0.
Pressing the lower left key, the display changes in the following order:
0→1→2→… →9→0.
●Completing the numerical value editing
Press the upper right key to complete the numerical value editing.
After editing the numerical values, the previous setup widow will be restored.
・ If the last digit of resolution is "5", that of the numerical value changes in the order of "0
→5→0".
・ Press the upper left key to cancel the setting.
・ The value is temporarily saved until completing each setting before moving the
numerical value editing. If canceled, it will be deleted.
To Next Page
Loading...
