No. 99MAH040B
1 OVERVIEW
This chapter describes overview of this instrument including names
and functions of each part, external dimensions, and details of the
display unit.
1.1 Overview
This instrument is the dedicated inside diameter measuring instrument mounted to the
bore gage (511, 526 series). To obtain the highest performance from this instrument and to
use it safely, read this User‘s Manual and User‘s Manual of the bore gage prior to use.
Measurement and Setup mode are available with this instrument.
Measurement mode
・Normal mode : Dynamically displays measurement data
・Minimum value detection mode: Detects minimum value of the measurement data
Setup mode: Enables each setting
The measuring system of this instrument is the only ABS system (Absolute value
measurement which measures distance (displacement) from a preset position).
・ In this instrument, there are no run-out value detection mode and maximum value
detection mode.
・ There is not INC system.
・ This instrument is specially designed for bore gage. Therefore, the count direction
when spindle is pressed is limited to minus, and the plus direction is not available.
To Next Page
Loading...
