No. 99MAH040B
3.3.5 OTHER: Other functions
Check or set up the PC communication or the unit display.
Selecting items available in OTHER functions
1. Press the upper right key in the measurement mode to move the setup mode.
2. Press the lower left or lower right key to move the blinking cursor to "OTHER".
3. Press the center key to move the ON/OFF selection of OTHER functions.
4. Press the lower left or lower right key to change the item in the other functions.
•Pressing the lower left key, the display changes in the following order:
PC communication → Analog bar display →...→ All reset → PC communication
•Pressing the lower right key, the display changes in the following order:
PC communication → All reset→...→ Analog bar display → PC communication
5. Press the center key to return to the parameter setting.
・ Press the upper left key to cancel the operation.
To Next Page
Loading...
