No. 99MAH040B
Do not strike the instrument or allow it to be struck.
Do not drop it or apply excessive force to it.
Do not disassemble or modify the instrument.
Do not press the keys with a pointed object (such as screwdriver or ballpoint pen).
Do not use or store the instrument under direct sunlight, or in an excessively hot or
cold environment.
Be alert for malfunction due to material deterioration if it is used in an environment with
low or high atmospheric pressure.
Do not store the instrument in a high-humidity environment. Do not use the instrument
where it could be splashed with coolant.
Do not use high-voltage equipment, such as an electric marking pen, near the
instrument. Electronic parts may be damaged by such equipment. Be alert for
malfunction if it is used in the vicinity of electric noise.
Secure the instrument with a fixture such as a dial gage stand in a vibration-free
environment.
Do not subject the spindle to a vertical load or torsion.
Wipe stains from the instrument panel by using a soft cloth or a cotton swab that is dry
or moistened with diluted neutral detergent. Do not use an organic solvent such as
thinner and benzene, which may cause the instrument panel to deform or malfunction.
The contaminated spindle may cause malfunction. Wipe them off with a cloth damped
with alcohol.
Be alert for measurement errors caused by thermal expansion of the component parts
and the fixtures, resulting from a significant temperature fluctuation. Use the instrument
in a temperature-controlled room that has minimum temperature fluctuation. Allow
sufficient time for the instrument to thermally stabilize if it is moved to an environment
with a different temperature.
To Next Page
Loading...
