This document and the information contained herein, is the exclusive property of MODE. And represents a nonpublic,
confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, or otherwise employed in
any manner. whatsoever without the express written consent of MODE. Copyright © (2016) MODE. Allrights reserved.
Do not allow the equipment to be used unless it is in proper
condition. In case of doubt, contact a service agent authorized by the
manufacturer or manufacturer's representative! The use of defective
equipment can result in serious damage, injury or death.
Keep the product in a safe condition
Owners SHALL ensure that the equipment is kept in a safe、condition.
For example, all warning devices must be kept in good working order.
Fire safety
Owners SHALL ensure that personnel are prepared in case of fire and that
the correct fire-fighting equipment is available and maintained.
First Aid
Owners SHALL ensure that, in accordance with local regulations,
personnel are prepared in case of accidents and that a suitable first-aid kit
is available and maintained.
Emergency Stop devices
Owners SHALL ensure that they, and the operators, know the locations of
emergency stop devices so that they can be activated in emergency
situations.
Emergency stop devices should never be used as a substitute for making
proper use of the direction controls. Routinely using the emergency stop
button increases wear on the product components and can cause the load
to swing.
Ensure that signs are maintained in good condition
Owners SHALL ensure that signs and warnings are present on the
equipment and are in good condition.
Keep the working site clean
The working site should be kept free of clutter and dirt. Oil spills must be
cleaned up immediately to reduce the risk of slipping.
To Next Page
Loading...
