This document and the information contained herein, is the exclusive property of MODE. And represents a nonpublic,
confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, or otherwise employed in
any manner. whatsoever without the express written consent of MODE. Copyright © (2016) MODE. Allrights reserved.
Operator training
Owners SHALL ensure that operators are properly trained.
Operators must know how to operate
2.10 Safety during maintenance
Before and during product maintenance, the product owner must take the following
precautions:
Safe access to the product is the owner’s responsibility.
Use experienced service personnel, authorized by the manufacturer
of the product, for servicing the product. The person servicing the
product must be competent for the task and must be familiar with the
servicing and inspection instructions.
After a collision or overload situation, inspection and repair
operations to be carried out on the product must be discussed with
the supplier.
Only use genuine spare parts approved by the manufacturer.
Before and during product maintenance, the product owner must be aware that the
following precautions should be taken by maintenance personnel:
Choose a safe working location
The product should be moved to a location where it will cause the
least disturbance and where it can be accessed easily.
Prevent unauthorized access to the site
Prevent unauthorized persons and bystanders from walking on or
below the work site. For example, you can lock doors, install
barriers and display notices.
Ensure that the secured area is spacious enough to prevent injuries
which could occur as a result of falling components or tools.
Inform that equipment will be undergoing maintenance
Before starting maintenance, people must be properly informed
that the equipment is being removed from operation.
To Next Page
Loading...