This document and the information contained herein, is the exclusive property of MODE. And represents a nonpublic,
confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, or otherwise employed in
any manner. whatsoever without the express written consent of MODE. Copyright © (2016) MODE. Allrights reserved.
1 GENERAL INTRODUCTION
1.1 Foreword: About this Manual
This manual offers guidance to enable safe and efficient operation of the equipment.
Taking the time to read this manual will help you to prevent damage to the equipment, and,
most importantly, personnel situated close to it. The equipment is designed to be safe when
used correctly. However, there are many potential hazards associated with incorrect operation
and these can be avoided when you know how to recognize and anticipate them.
This manual will also make you aware of your responsibilities with respect to the equipment and
help you to ensure that it is kept in a safe operating condition throughout its lifetime.
This manual is not intended as a substitute for proper training but provides recommendations
and methods for safe and efficient operation and maintenance. The equipment's owner must
ensure that operators are properly trained prior to operation and, at all times, comply with all of
the applicabIe and prevaiIing safety and other standards, rules and regulations.
1.2 Symbols Used in this Manual
Readers should familiarize themselves with the following symbols which are used in this
manual.
Indicates that the product is slowing down or is moving at its
slowest speed.
Indicates that the product is accelerating or moving at its highest
speed.
NOTE: Indicates items which require special attention by the reader.
There is no obvious risk of injury associated with notes.
1.3 Safety Alert Symbols and Signal Words
The following symbols are used in this manual to indicate potential safety hazards.
Obey all safety messages that follow this symbol to avoid possible
injury or death.
Indicates a potentially hazardous situation, which if not avoided, MAY
result in minor or moderate injury. It may also be used to alert against
unsafe practices.
To Next Page
Loading...