This document and the information contained herein, is the exclusive property of MODE. And represents a nonpublic,
confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, or otherwise employed in
any manner. whatsoever without the express written consent of MODE. Copyright © (2016) MODE. Allrights reserved.
Lifting points
Lifting points, if available, are marked with a sticker. Refer to chapter “Information signs
used on the hoist”.
Hook-suspended models
Lift the hoist from suspension hook
5.2 Electrical connections
Only qualified electrician shall make any electrical connections.
Electrical connections shall be made according to wiring diagrams
provided with the product.
Power supply shall be OFF and locked before making any electrical
connections. Lockout-tagout procedures must be followed in
accordance with local regulations. Refer to chapter “Lockout-Tagout
procedure”.
Note: There are wires hanging from the connector of hoist that were used in
manufacturing. They shaIl be removed Iateras instructed.