This document and the information contained herein, is the exclusive property of MODE. And represents a nonpublic,
confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, or otherwise employed in
any manner. whatsoever without the express written consent of MODE. Copyright © (2016) MODE. Allrights reserved.
Never PULL on the load or chain because, by doing so, it is easy to
get trapped and crushed, for example between a wall and the moving
load. Only move the trolley by PUSHING on the chain or load.
Never try to stop load swing with your hands. A swinging load
moves with considerable force. Your hands or body could be
seriously injured between the load and an obstacle or wall.
Guiding or steadying suspended loads directly with your hands is
prohibited. Use a tag line to guide the load or a more suitable lifting
device. Your hands or body could be seriously injured between the
load and an obstacle or wall.
7.6 Safety Procedure After Using the Hoist
The following checks must be done after every working shift to ensure that the hoist is in a
safe condition.
Ensure that there is
no load on the lifting
device unless it is
designed for that
purpose (e.g. the
BGV-C1 hoist).
Park the hook or other
lifting device where it
will not present a
hazard to people or
traffic but do not park
at the top safety limit.
Above head height is
recommended.
If applicable, park
the jib arm so that it
does not obstruct the
movement of other
hoists, for example.
Engage the
emergency stop
button.
Turn off all controls
on the controller.
Turn off power to the
hoist.
To Next Page
Loading...