This document and the information contained herein, is the exclusive property of MODE. And represents a nonpublic,
confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, or otherwise employed in
any manner. whatsoever without the express written consent of MODE. Copyright © (2016) MODE. Allrights reserved.
8.2 Service Personnel
Only authorized service personnel or an experienced service technician authorized by the
manufacturer or manufacturer’s representative may perform the detailed examinations
necessary for scheduled maintenance. Such examinations must be performed in accordance
with the inspection and maintenance plan provided by the product’s manufacturer. The original
manufacturer or manufacturer’s representative has approved authorized service personnel to
maintain its products.
The owner or operator of the product must perform the daily checks and, if required, daily
lubrication. Service personnel authorized by the owner may also lubricate the product at the
necessary intervals.
Note: Mechanical and electrical maintenance work requires special skills and
tools to ensure safe and reliable operation of the product. Maintenance work
shall be carried out only by authorized service personnel or an experienced
service technician authorized by the product’s manufacturer or
manufacturer’s representative.
8.3 Inspections
The operator/owner of a product shall carry out regular inspections to ensure the safe operation.
The product's owner shall also keep record of the inspections and findings.
Periodic inspections must be carried out by authorized service personnel or experienced
service technician authorized by the product’s manufacturer or manufacturer’s representative.
Inspections must be carried out according to manufacturer’s instructions.
Note: If the working environment or product usage changes, the inspection
and maintenance intervals may need to be revised.
Note: Products used under harsh conditions may require shorter service
intervals. Consult with the manufacturer or manufacturer's representative for a
tailored service agreement.
Note: Periodic inspections SHALL be carried out in accordance with local
regulations.
Any defects or abnormalities which are detected during the
inspections must be investigated and corrected in accordance with
the instructions relevant to component in question.
8.3.1 Daily Inspections
Daily inspection items are listed in chapter “Instructions for the operator5’. In most cases these
checks will be performed by operators.
To Next Page
Loading...