This document and the information contained herein, is the exclusive property of MODE. And represents a nonpublic,
confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, or otherwise employed in
any manner. whatsoever without the express written consent of MODE. Copyright © (2016) MODE. Allrights reserved.
Pay special attention to all safety-critical components
The brakes, limit switches, hook, chain and controller are、all
safety-critical items which must always be kept in good order.
Ensure that safety devices (overload protectors, limit switches, etc.)
work properly so that they provide protection against human error.
Beware of high temperature components
Some components of the product, such as the motors, can become
very hot during use. Check that components are cool before
working on them.
2.10.1 Lockout-Tagout Procedure
During installation, inspection and maintenance, lockout-tagout procedures must be followed in
accordance with local regulations and the documented site lockout-tagout policy. The owner
must ensure that the operators are fully aware of the applicable lockout-tagout practices.
Lockout-tagout procedures are primarily intended to protect personnel by preventing accidental
starting or exposure to electric shocks. Individual locks and tags are placed on controls to
prevent their use until the person who installed the lock or tag removes it
Never attempt to operate a control, switch, valve or other device
when it is locked out or tagged out.
Items which are normally included in the documented lockout-tagout policy:
Communication requirements: who to inform before using lockout-tagout.
When the use of lockout- tagout is permitted.
Identification of each of the switches, controls, valves and other energy isolating devices
present at the site. The role of each device should also be explained.
The lockout-tagout sequences to be followed before, during and after maintenance.
Safety and operational considerations regarding other products on the same runway or on
adjacent runways.
To Next Page
Loading...