This document and the information contained herein, is the exclusive property of MODE. And represents a nonpublic,
confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, or otherwise employed in
any manner. whatsoever without the express written consent of MODE. Copyright © (2016) MODE. Allrights reserved.
When operating the hoist, make sure there are no people situated
underneath or nearby the load. Operating the hoist when people are
underneath or near the load could cause death or serious injury to
those situated underneath or near the load.
If the crane has a horn, push the
horn push button to warn people
nearby that a load is about to be
moved.
Push the DOWN push button to
lower the load.
Decrease the lowering speed by
gradually releasing the DOWN push
button when the load is approaching
the ground.
Fully release the DOWN push
button when there is slack in the
lifting device but before the hook or
lifting device impacts the load.
Detaching the Load
Always remove the load from the hook by hand. Never try to use crane motions to remove the
load from the hook. The safety latch on the hook should prevent this.
7.5 Load Control
The operator must use the correct techniques to properly control the load at all times to prevent
uncontrolled movements such as load swing or rotation.
If the load has a tendency to rotate or swing, a third person can guide the load with a tag line,
provided that it is safe to do so.
Guiding or steadying loads by hand
Guide and steady the load by controlling it by hands.
To Next Page
Loading...