This document and the information contained herein, is the exclusive property of MODE. And represents a nonpublic,
confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, or otherwise employed in
any manner. whatsoever without the express written consent of MODE. Copyright © (2016) MODE. Allrights reserved.
Always follow instructions provided by the lifting device
manufacturer and the local authorities! As the manufacturer of the
hoist we are not responsible for lifting accessories provided by other
manufacturers.
Never use a lifting device which does not clearly display the
maximum capacity or is not approved by authorities. The load falls
down if the lifting device fails.
Never use a lifting device which is unsuitable for the purpose. The
load falls down if the lifting device fails.
Never use a damaged lifting device. Carefully inspect lifting devices
before using them. The load falls down if the lifting device fails.
Before lifting
Check that the load is balanced and safely fastened at the lifting points. The load must not be
able to slide, slip or detach itself when suspended.
Do not move the load before ensuring that it is properly attached to
the lifting device. Moving the load prematurely can cause serious
injury.
Use lifting devices in accordance with the manufacturer’s
instructions.
An unbalanced load is likely to drop and/or damage the product.
Slings and harnesses must be positioned so that the pulling force of
the auxiliary lifting devices lies on the hoist's center of gravity.
Note: When you begin the lifting, check that the load is properly balanced
before lifting it high off the ground. If the load is not balanced, lower it down and
adjust the lifting point.
If the load is not balanced, do not try to support it with your hands.
Lower the load down and adjust the lifting point again.
To Next Page
Loading...