MODE V6 - 5 Keep lubricants away from food and drink.; 6 Used lubricant shall be handled as hazardous waste...; 7 Keep grease nipples clean.; 8 All slide bearings must be depressurized...

7/2015
This document and the information contained herein, is the exclusive property of MODE. And represents a nonpublic,
confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, or otherwise employed in
any manner. whatsoever without the express written consent of MODE. Copyright © (2016) MODE. Allrights reserved.
65 / 82
5
Keep lubricants away from food and drink. Do not inhale any fumes
or swallow lubricants.
6
Used lubricant shall be handled as hazardous waste following local
legal requirements.
Store used lubricant in containers indicated for the purpose and
dispose by a licensed company.
7
Keep grease nipples clean.
8
All slide bearings must be depressurized for the grease to be able
to penetrate.
9
While lubricating, check the functioning of the bearings and
observe whether there is any bearing slackness.
10
The specified lubrication periods apply in favorable conditions and
normal use. More frequent lubrication is recommended in more
demanding conditions and in heavy use, particularly of the slide
bearings.
11
Verify that the gear teeth of the open gear transmission are entirely
lubricated.
Note: Do not use excessive lubricant. Excessive grease may cause the
bearings to overheat and reduces the lifetime of the bearings.