This document and the information contained herein, is the exclusive property of MODE. And represents a nonpublic,
confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, or otherwise employed in
any manner. whatsoever without the express written consent of MODE. Copyright © (2016) MODE. Allrights reserved.
As waste regulations and types of recovery and disposal methods vary so much regionally, no
general detailed guidance can be given. The chart below gives example of manufacturer’s
proposals for adequate waste handling methods.
Use always licensed recycling companies
Metals should be recycled.
Electronics and electromechanical components should be
collected separately and recycled. Some electrical parts may be
treated as hazardous waste, e.g. standard fluorescent lamps
contain mercury.
Batteries and other energy storage components may contain
hazardous substances. These items should be collected
separately and recycled according to local regulations.
Plastics should be either recycled as material or used for energy
recovery or landfilled. PVC plastic should be recycled according to
local regulations.
Chemicals, like oil, grease and other liquids shall never be spilled
onto the ground, soil or sewage. Waste oil and grease shall be
stored in containers indicated for the purpose. More detailed
information of chemical handling as waste can be found in the
chemical’s Safety Data Sheet that is available from manufacturer
of the chemical.
Packing materials, like plastics, wood and cardboard, should be
reused or recycled as material or to energy.
To Next Page
Loading...
