Maintenance
130 5016072 A
CAUTION! Do not touch or loosen any screws or parts other than
those specifically designated in the instructions. Doing so could cause
misalignment and possibly void the warranty.
WARNING! SHOCK HAZARD: Removal of protective covers that
are marked with the High Voltage warning symbol can result in
a safety hazard.
WARNING! Always disconnect the power cord from the main
power source before performing any maintenance procedure
that requires removal of any panel or cover or disassembly of
any interior instrument component.
WARNING! Never perform any operation on the instrument in
an environment where liquids or potentially damaging gases
are present.
WARNING! Risk of electrical shock. Refer servicing to qualified
personnel.
StakMax-UG-5016072A.book Page 130 Friday, October 21, 2011 3:51 PM
To Next Page
Loading...
