SECTION 4
35
Review Exam
This replay function allows the user to play back the entire stress test on screen. Exam review may take place
immediately after ending the stress test or at a later date by selecting the patient from the directory. From the Report
Manager screen, select Review Exam. ECG data is displayed at real-time speed and the following commands are
available.
Terminate the review session and return to Report Manager by selecting END or F1.
Increase the playback speed up to 4 times the real time (x4) by selecting FAST or F3.
Decrease the playback speed down to ¼ the real time (x 0.25) by selecting SLOW or F4.
Toggle between play and pause by selecting PAUSE or F5.
Users can also manipulate play back time by clicking on the trends graph during review mode. Select or set the test
time by clicking on the trends graph; a vertical line indicates the current time into the test and the replay mode is
terminated. Replay restarts at the position selected on the graph and represented by the vertical line.
Save Report
Click Save Report to save all changes made. A report must be saved in order to label the test as “Reported”.
Exams cannot be exported until they are saved.
NOTE: The final report when saved must have at least 1 copy selected in order for the report to be stored
in PDF, XML, TIFF, or DICOM.
New Exam
Users can begin a new stress test from Report Manager. New Exam is only active in Report Manager after a stress
test is completed. It is not available when entering Report Manager by selecting an exam from the archive.
Template
Automatically populate a user-definable template by using the template icon to the left of the conclusions field.
Select the template icon to display a drop-down window of up to 20 user-definable templates. Upon selecting the
desired template, the conclusions window will automatically populate with the appropriate clinical data and be
included in the final report.
Main Menu
Click Main Menu to return to the X-Scribe startup screen.
To Next Page
Loading...
