Mortara X-Scribe - Direct Connect Appendix D; Direct Connect

DIRECT CONNECT
APPENDIX D
67
X-Scribe offers the capability of using Mortara Instrument’s M12 series “Multi-Modality Module (MMM)” patient
interface cable for direct or wireless connection to the patient.
Follow patient hookup instructions as previously described in this manual. Connect the M12A or the M12B patient
cable to the Multi-Modality Module device.
Multi-Modality Module (MMM)
 permits the X-Scribe to function in a wireless mode
using either 608 MHz or 2500 MHz RF frequency
capability.
 can be used either as a wireless or direct connect
patient interface device.
 antenna is connected with two 18” cables and must
be at least 12” apart when installed. Refer to the
installation instructions included with your X-Scribe
system.
 includes both TTL and analog output capabilities as a
standard feature.