Motorola ACE3600 RTU - Ao Module Configuration

Analog Output Module
13-3
Figure 13-2 provides a detailed view of the AO module front panel.
ERR
Iout
Vout
CAL
1
2
3
4
Iout
Vout
CAL
Iout
Vout
CAL
Iout
Vout
CAL
Figure 13-2 ACE3600 AO Module – Front Panel
AO Module Configuration
AO Type
The analog outputs can be set to voltage, current, or raw data. See Module Status and
Diagnostics for details.
AO Value
The analog outputs can be set to a numeric value (in the range of 0 to 16000) or either in
voltage or current according to the output type. The values for voltage are 0 to 10 V and the
values for current are 0 to 20 mA. See Module Status and Diagnostics for details.