Motorola ACE3600 RTU - Connecting the Power Supply to a Power Source

Power Supply Module and Backup Battery
3-11
Connecting the Power Supply to a Power Source
The power supply can be connected to an AC or DC power source. The DC power supply
low-tier can be connected to a DC power source only.
The expansion power supply module is connected to another ACE36000 power supply using a
DC power cable (FKN8559A/#3002360C26).
For instructions on connecting the power supply to a power source, see the Power and Ground
Connections section of the Installation chapter above.
All power and ground connections must be in accordance with local standards and
laws.