Expansion Power Supply Module
19-6
Expansion Power Supply Module Specifications
Input Voltage DC 10.8-16 V
Outputs To Motherboard connector – +10.80 to +16.00 VDC, max. 4A
To cascaded expansion power supply - +10.80 to +16.00 VDC, max. 8A
Over Current
Protection
4.0 A (Slow blow fuse), protecting the expansion frame
8.0 A (Slow blow fuse), protecting the cascaded expansion power supply
Maximum Current
via Power IN/OUT
circuit
8.0 A (Slow blow fuse)
Over Voltage
Protection
+17.00 ±1 VDC (protecting the expansion frame)
Absolute Maximum
Voltage
+18.00 VDC
Dimensions 56 mm W x 225 mm H x 180 mm D (2.2" W x 8.7" H x 7.1" D)
Weight Approx. 0.43Kg (0.94 Lb)
Specifications subject to change without notice.
To Next Page
Loading...
