Installation
2-24
Mobile Radio
Portable Radio
Accessory Boxes
Battery
Figure 2-27 Accessories Installed on a Metal Chassis
2) To remove the accessory box interface from the metal chassis, insert a screwdriver into the
notch located in the snap securing the unit to the chassis. Slightly bend the snap outwards
to release it from the slot, and carefully pull out the unit.
19" Frame Metal Back Installation Combinations
The 19" frame metal back can be ordered with a variety of frames, modules, and accessories
(e.g. battery, radio, accessory box.) In certain cases, choosing a certain accessory reduces the
other options. For example, the portable radio is installed on the 19" frame metal back with the
No I/O Frame in place of one accessory box. Likewise a battery is installed on the 19" frame
metal back with the No I/O Frame in place of one accessory box.
For diagrams of the various combinations, see Figure 2-28 below.
To Next Page
Loading...
