6881096C74-B May 25, 2005
Troubleshooting Charts: Board ID Jumper Configuration 5-13
Figure 5-3. Main Board Test Points—Top Side (for High Power)
Figure 5-4. Main Board Test Points—Bottom Side (for High Power)
5.5 Board ID Jumper Configuration
The following jumper table (Table 5-5 on page 5-14) is provided for troubleshooting and determining
what board revision you have. This can be helpful in the event a jumper was placed incorrectly or
was removed during a repair and the radio is not functioning correctly.
This table provides two types of information:
• RF band of the radio
• Overall revision of the main board and controller section
TP0400
TP0401
TP0402
TP0403
TP0407
TP0408
TP0409
TP0410
TP0411
TP0412
TP0413
TP0414
TP0415
TP0950
TP0500
TP0420
TP0200
TP0419
TP0418
TP0206
TP0204
TP0203
TP0205
To Next Page
Loading...
