Motorola LEX L10 - Selecting Profiles on a Bluetooth Device; Unpairing a Bluetooth Device; Pairing the LEX L10 with a Radio

2
Tap ,
3
Tap Bluetooth,
4 If Bluetooth is not on, slide the switch to the ON position.
5 In the AVAILABLE DEVICES list, tap an unconnected Bluetooth device until a menu appears.
6 Tap Pair.
When connected, the device is displayed as connected in the list.
8.3.9 Selecting Profiles on a Bluetooth Device
Some Bluetooth devices have multiple profiles for different connections.
When and where to use: Use this procedure to select a profile on the Bluetooth device that connects to the LEX L10.
Procedure:
1
Tap .
2
Tap .
3
Tap Bluetooth.
4
In the AVAILABLE DEVICES list, tap next to the device name.
5 Under PROFILES, select a profile to use.
6
Tap .
8.3.10 Unpairing a Bluetooth Device
Prerequisites: The Bluetooth device is paired with the LEX L10.
When and where to use: Use this procedure to unpair a Bluetooth device and erase all its pairing information.
Procedure:
1
Tap
.
2
Tap .
3
Tap Bluetooth.
4
In the AVAILABLE DEVICES list, tap next to the device name.
5 Tap Unpair.
6
Press .
8.4 Pairing the LEX L10 with a Radio
The LEX L10 can extend its functionality by remotely operating and controlling an external proprietary Motorola
Solutions Radio (such as the APX
™
7000/APX
™
7000L) or accessory using Bluetooth.
Once pairing is established, the range of connection is no more than 10 meters line-of-sight. This is an unobstructed
path between the location of the LEX L10 and the location of the Radio (or other paired accessory).
Obstacles that can cause an obstruction in the line-of-sight include trees, buildings, cars and etc. It is NOT
recommended that you leave the Radio behind and expect the LEX L10 to work with a high degree of reliability when
they are separated.
Wireless | 137
MN001456A01-A | February 2015 | Send Feedback