Note: Certificates are installed using the Security settings.
• Tap User certificate and select a user certificate.
Note: User certificates are installed using the Security settings.
• Tap Identity to enter the username credentials.
• Tap Anonymous to enter an anonymous identity username.
• Tap Password to enter password.
11
Tap .
8.2.5 Advanced WiFi Settings
Note: Advanced WiFi settings are for the device not for a specific wireless network.
Use the Advanced settings to configure additional WiFi settings. From the WiFi screen, tap → Advanced to view
the advanced settings.
• Network notification — When enabled, notifies the user when an open network is available.
• Keep WiFi on during sleep — Opens a menu to set whether and when the WiFi radio turns off.
- Always — The radio stays on when the device enters suspend mode.
- Only when plugged in — The radio stays on while the device is connected to external power.
- Never (increases data usage) — The radio turns off when the device enters suspend mode (default).
• WiFi optimization — Minimize the battery usage when WiFi is on.
• Avoid poor Connection — The LEX L10 connects to the internet only if connection is good.
• MAC address — Displays the Media Access Control (MAC) address of the device when connecting to WiFi
networks.
• IP address — Displays the IP address of the device when connecting to WiFi networks.
8.2.6 WLAN Configuration
Use the WLAN Configuration settings to configure additional WLAN settings. From the WiFi screen, tap →
Advanced to view the settings. The following two settings are used to configure WLAN:
• WiFi frequency band
- Auto (2.4GHz and 5GHz) —Use both the 2.4 GHz and 5 GHz bands (default).
- 5Ghz Only — Use only the 5 GHz band.
- 2.4Ghz Only —Use only the 2.4 GHz band.
• Keep WiFi on during sleep
- Always — WiFi is always enabled even in sleep mold.
- Only when plugged in — WiFi is enabled only when the LEX L10 is plugged in. If the LEX L10 is not
plugged in, the device will not enter the sleep mold.
- Never (increases data usage) — WiFi is never disabled.
8.2.7 Modifying a WiFi Network
The user can change settings and passwords for a network in the WiFi list.
Procedure:
1
Tap .
Wireless | 131
MN001456A01-A | February 2015 |
Send Feedback
To Next Page
Loading...
