Figure 45: Radio Remote Control Screen
5.1 Pairing Radio with the LEX L10
This procedure pairs a radio with a LEX L10.
Prerequisites:
•
Verify that your Land Mobile Radio (LMR) includes a secure Bluetooth pairing feature. Turn on Bluetooth feature
of the LEX L10 and radio. In the radio, enable the Bluetooth tones (see LMR User Guide).
• The LEX L10 is not paired with other radio.
When and where to use: Use this procedure to pair a LEX L10 with a radio.
Note: To pair the LEX L10 to a radio, ensure that the Bluetooth feature of the LEX L10 is enabled and
bring the blue pairing points on each device to within 2.5 cm. Once paired, their Bluetooth link has a line-
of-sight range of 30 feet (10 meters).
Procedure:
1
From the Home screen, tap .
The Application screen displays.
2
Tap .
The Pair with a radio screen appears.
80 | Radio Remote Control
Send Feedback | February 2015 | MN001456A01-A