Motorola LEX L10 - Figure 18: Sound Screen; Figure 19: Volume Button

Figure 18: Sound Screen
• Volumes – Use to change the volume of media, ringtones, notifications, and alarms.
• Call Ringtone and Vibrate
- Phone ringtone — Tap to select a ringtone to sound when an incoming call is received.
- Vibrate when ringing — Check to make the device vibrate when a call is received.
Note: Setting volume can also be done by pressing the Volume button, up and down, during a call,
or while playing music or a video. When not on a call, pressing the Volume button all the way down
to set the LEX L10 to vibrate. During an in-coming call, pressing the Volume button up and down
changes the ringtone volume.
Figure 19: Volume Button
• System
- Default notification sound — Tap to select a sound to play for all system notifications.
- Dial pad tap tones — Check to play a sound when a LEX L10 key is touched.
- Touch sounds — Check to play a sound when making screen selections.
46 | Getting Started with the LEX L10
Send Feedback | February 2015 | MN001456A01-A