Motorola LEX L10 - Backing Up the LEX L10; Backing up Contacts

10.8 Backing Up the LEX L10
Backing up the LEX L10 must be done manually.
Prerequisites: A USB cable to connect the LEX L10 to a computer.
When and where to use: Use this procedure anytime a backup of the LEX L10 is necessary.
Procedure:
1 Connect the LEX L10 to a computer using the supplied USB cable.
The first time you connect to a computer the following message is displayed:
Installing Device Driver Software
After the driver software is installed, the following message is displayed:
Your device is ready to use
2 Click the Start button and then select Computer.
3 Select the LEX L10 Portable Device.
4 Select Internal storage.
5 Navigate to the files that you want to back up.
6 Copy the files/folders to a secure location on your computer.
10.8.1 Backing up Contacts
To back up contacts, the contacts must be exported to a VCF file which must be copied to a secure location.
Prerequisites: Contacts must exist in the contact list.
When and where to use: Use this procedure to periodically back up your contacts.
Procedure:
1
From the Home screen, tap .
2
Tap .
150 | Maintenance & Troubleshooting
Send Feedback | February 2015 | MN001456A01-A