Table 2: Charge and Notification LED — Charging Indications
Status Indications
Off Battery is not charging. Could indicate that:
•
LEX L10 is not inserted correctly in the cradle
• LEX L10 is not connected to a USB cable
• Charger or cradle is not powered
Slowly blinking red (once every 2 seconds) Battery power is extremely low (less than 10% power
left).
Solid red LEX L10 is charging.
Fast blinking red (once every 0.5 second) Charging error:
• Temperature is too low or too high
• Charging has gone on too long without completion
(typical charge is four hours)
Slowly blinking green (once every 2 seconds) Battery is greater than 90% charged.
Solid green LEX L10 is completely charged.
Slowly blinking blue (once every 4 seconds) A new notification has been received.
Alternately blinking blue (1 second) and red (3 seconds) LEX L10 is charging and a new notification is received.
Alternately blinking blue (1 second) and green (3 sec-
onds)
LEX L10 is completely charged and a new notification is
received.
Slowly blinking blue and red (every other second) Battery power is extremely low (less than 10% power
left) and a new notification is received..
Alternately blinking blue (1 second) and fast blinking red
(every 0.5 seconds for 3 seconds)
A new notification is received during a charging error.
Slowly blinking amber (once every 2 seconds) LEX L10 is waiting to charge.
When the battery power falls below a predetermined level the icon indicates the status and a battery dialog box
appears indicating the status of the battery. The message displays until the user taps Dismiss.
To monitor battery usage, from the Home screen, touch → → Battery.
2.4.3 Battery Management
Note: Before checking the battery charge level, remove the LEX L10 from any AC power source (cradle or
cable).
To check the charge status of the main battery, tap → → About phone → Status.
Battery status indicates that the battery is discharging and Battery level lists the battery charge (as a percentage of
fully charged).
2.4.3.1 Monitor Battery Usage
The Battery screen lists which applications consume the most battery power. Also use it to turn off applications that
were downloaded if they are consuming too much power.
To monitor battery usage, tap → → Battery.
34 | Getting Started with the LEX L10
Send Feedback | February 2015 | MN001456A01-A
To Next Page
Loading...
