Motorola LEX L10 - Changing the Bluetooth Name; Connecting to a Bluetooth Device

Figure 96: Bluetooth Pairing
9 Tap Pair on both devices.
The Bluetooth device is added to the Bluetooth devices list and a trusted (“paired”) connection is established.
8.3.7 Changing the Bluetooth Name
By default, the LEX L10 has a generic Bluetooth name that is visible to other devices when connected.
Procedure:
1
Tap .
2
Tap .
3
Tap Bluetooth.
4 If Bluetooth is not on, slide the switch to the ON position.
5
Tap .
6 Tap Rename Phone.
7 Enter a name and tap Rename.
8
Tap .
8.3.8 Connecting to a Bluetooth Device
Once paired, connect to a Bluetooth device.
Prerequisites: The Bluetooth device must be in discoverable mode.
Procedure:
1
Tap ,
136 | Wireless
Send Feedback | February 2015 | MN001456A01-A