Motorola LEX L10 - Bluetooth Tethering; Portable WiFi Hotspot

Figure 91: USB Cable Connection to Host Computer
A USB icon appears at the top of the screen, and the notification Connected as a media device appears briefly
at the top of the screen.
2
Tap .
3
Tap .
4 Tap More ... .
5 Tap Tethering & portable hotspot.
6 Check USB tethering.
The host computer is now sharing the LEX L10 data connection.
Postrequisites: To stop sharing the data connection, uncheck USB tethering or disconnect the USB cable.
8.1.1.2 Bluetooth Tethering
Use Bluetooth tethering to share the data connection with a host computer.
Prerequisites: Configure the host computer to obtain its network connection using Bluetooth. For more information,
see the host computer’s documentation.
Procedure:
1 Pair the LEX L10 with the host computer.
2
Tap .
3
Tap .
4 Tap More ... .
5 Tap Tethering & portable hotspot.
6 Check Bluetooth tethering.
The host computer is now sharing the LEX L10 data connection.
Postrequisites: To stop sharing the data connection, uncheck Bluetooth tethering .
8.1.1.3 Portable WiFi Hotspot
Prerequisites: Configure the WiFi Hotspot settings.
122 | Wireless
Send Feedback | February 2015 | MN001456A01-A