Motorola LEX L10 - Establishing a Connection

At the fringe areas of reception, both voice and tone quality will start to sound "garbled" or "broken". To correct this
problem, simply position the LEX L10 and Radio (or other paired accessory) closer to each other (within the 10 meter
defined range) to re-establish clear audio reception.
8.4.1 Establishing a Connection
Prerequisites:
•
Verify that your Land Mobile Radio (LMR) includes a secure Bluetooth pairing feature. Turn on Bluetooth feature
of the LEX L10 and radio. In the radio, enable the Bluetooth tones (see LMR User Guide).
• The LEX L10 is not paired with other radio.
When and where to use: Use this procedure to pair the LEX L10 with a radio.
Procedure:
1 Turn on the radio.
2
On the LEX L10 screen, tap
.
3
On the LEX L10 screen, tap .
The Pairing screen displays on the LEX L10 and the pairing process starts.
Figure 97: Pairing Screen
4 Bring the blue pairing dots on the LEX L10 and radio close to each other (within 2.5 cm) and follow the
instructions shown on the LEX L10 screen.
138 | Wireless
Send Feedback | February 2015 | MN001456A01-A