Figure 57: Channel Selection Screen
4 Select a channel.
The Change Channel Confirmation screen appears if the channel was selected for the first time. Tap Yes to
confirm. The Radio Remote Control screen is displayed.
5.5 Setting Radio Volume
This procedure remotely selects the volume for the remote radio on the LEX L10.
Prerequisites: The radio and the LEX L10 are successfully paired.
When and where to use: Use this procedure to remotely set the volume for the remote radio on the LEX L10.
Procedure:
1
From the Home screen, tap .
2
Tap .
The Radio Remote Control screen appears.
88 | Radio Remote Control
Send Feedback | February 2015 | MN001456A01-A
To Next Page
Loading...
