Do not leave the radio behind and expect the LEX L10 to work with a high degree of reliability when they are
separated. At the fringe areas of reception, link can be broken. To correct this problem, position the LEX L10 and
radio closer to each other to reestablish connection.
The LEX L10 remembers the radio and will automatically resume connection whenever the radio is on and within
connection range.
5.2 Unpairing the Radio
This procedure unpairs a set of paired radio with a LEX L10.
Prerequisites: The LEX L10 is paired with the radio.
When and where to use: Use this procedure to unpair the LEX L10 from a radio.
Procedure:
1
From the Home screen, tap .
2
Tap .
The Radio Remote Control screen appears.
Figure 50: Radio Remote Control Screen
3
Tap → Unpair.
Radio Remote Control | 83
MN001456A01-A | February 2015 | Send Feedback
To Next Page
Loading...
