5.4 Setting Zone and Channel
This procedure remotely selects the zones of the remote radio on the LEX L10.
Prerequisites: The radio and the LEX L10 are successfully paired.
When and where to use: Use this procedure to remotely set the zones of the remote radio on the LEX L10.
Procedure:
1
From the Home screen, tap .
2
Tap .
The Radio Remote Control dialog box displays.
Figure 56: Radio Remote Control Screen
3 Select a zone.
The Channel Selection screen appears, displaying a list of channels available for that zone.
Radio Remote Control | 87
MN001456A01-A | February 2015 | Send Feedback
To Next Page
Loading...
