Motorola LEX L10 - Removing the Battery; Charging the LEX L10

Figure 7: Installing the Battery
2.3.8 Removing the Battery
When and where to use: Use this procedure to remove the battery:
Procedure:
1 Slide a finger nail (preferably a thumb nail) into the Battery Cover removal slot and gently pull the Battery Cover
away from the LEX L10
2 Remove the Battery Cover.
3 Slide the Battery Lock up and hold it.
4 With the tip of your finger, lift up the battery from the side closest to the top side of the LEX L10.
2.4 Charging the LEX L10
Before using the LEX L10 for the first time, charge the battery using the provided USB Charger and USB Cable or
connect the USB Cable to the USB port of a personal computer. An unused battery fully charges in less than six
hours.
The LEX L10 battery can also be charged by one of the optional charging cradles.
32 | Getting Started with the LEX L10
Send Feedback | February 2015 | MN001456A01-A