Motorola RFS7000 Series - Viewing and Configuring Bridge Instance Details; Creating a Bridge Instance

Network Setup
4-125
4.10.2 Viewing and Configuring Bridge Instance Details
The Bride Instance tab displays the number of MST instance created and VLANS associated with it. To view
and configure the MSTP bridge instance:
1. Select Network > Multiple Spanning Tree from the main menu tree.
2. Select the Bridge Instance tab.
The Bridge Instance tab displays the following:
3. Select an ID and click the Delete button to remove from the list.
4.10.2.1 Creating a Bridge Instance
To create a VLAN instance and associate it with a bridge as a numerical identifier:
1. Select Network > Multiple Spanning Tree from the main menu tree.
ID Displays the ID of the MST instance.
Bridge Priority Displays the bridge priority for the associated instance.
The Bridge Priority is assigned to an individual bridge based on
whether it is selected as the root bridge. The lower the priority, the
greater likelihood the bridge becoming the root.
Bridge ID Displays the MAC address of the bridge.
Designated Root Displays the ID of the root bridge that sent the BPDU received on
this port.
Internal Root Cost Displays the configured path cost on a link connected to this port
within the internal MSTP region.
Root Port Displays the MAC address of the root port.
Master Port Displays the MAC address of the master port.
VLANs Displays the number of VLANs included in this MSTP instance.