Network Setup
4-82
5. Refer to the Traffic field for the following information:
6. Refer to the RF Status field for the following information:
7. Refer to the Errors field for the following information:
8. Refer to the Status field for the current state of the requests made from applet. This field displays
error messages if something goes wrong in the transaction between the applet and the switch.
9. Click Cancel to close the dialog without committing updates to the running configuration.
4.6.2.2 View a MU Statistics Graph
The MU Statistics tab has an option for displaying detailed MU statistics for individual MUs in a graphical
format. This information can be used for comparison purposes to chart MU and overall switch performance.
To view the MU Statistics in a graphical format:
1. Select a Network > Mobile Units from the main menu tree.
2. Click the Statistics tab.
WMM Displays WMM usage status for the MU, including the access
category currently in use. Use this information to assess whether
the MU is using the correct WMM settings in relation to its
intended data traffic type.
Pkts per second Displays the average packets per second received by the MU. The
Rx column displays the average packets per second received on the
selected MU. The Tx column displays the average packets per
second sent on the selected MU.
Throughput Displays the average throughput in Mbps between the MU and the
access port. The Rx column displays the average throughput in
Mbps for packets received on the selected MU from the access
port. The Tx column displays the average throughput for packets
sent on the selected MU from the access port.
Avg. Bit Speed Displays the average bit speed in Mbps on the selected MU. This
includes all packets sent and received.
% Non-unicast pkts Displays the percentage of the total packets for the MU that are
non-unicast packets. Non-unicast packets include broadcast and
multicast packets.
Avg MU Signal Displays the RF signal strength in dBm for the selected MU.
Avg MU Noise Displays the RF noise for the selected MU.
Avg MU SNR Displays the Signal to Noise Ratio (SNR) for the selected MU. The
Signal to Noise Ratio is an indication of overall RF performance on
the wireless network.
Avg Num of Retries Displays the average number of retries for the selected MU. Use
this information to assess potential performance issues.
% Gave Up Pkts Displays the percentage of packets the switch gave up on for the
selected MU.
% of Undecryptable
Pkts
Displays the percentage of undecryptable packets (packets that
could not be processed) for the selected MU.
To Next Page
Loading...
Need help?
General
