Switch Information
3-29
3.5.2 Viewing Files
Use the File System tab to review the files available to the switch. The switch maintains the following file
types:
•flash
•nvram
• system
• Compact Flash
•USB 1
•USB 2
Transfer files between the switch and the server from any one of the above mentioned locations. Since
compact flash (CF) and USB are external memory locations, the File System window displays the status of
these devices. Transfer files to compact flash and USB only if they are connected and available.
To view the file systems currently available to the switch:
1. Select Switch > File Management from the main menu tree.
2. Select the File System tab.
3. Refer to the following File Systems information.
Name Displays the memory locations available to the switch.
Available Displays the current status of the memory resource. By default,
nvram and system are always available.
• A green check indicates the device is currently connected to
the switch and is available.
• A red X indicates the device is currently not available.
To Next Page
Loading...
Need help?
General
