MTA TAEevo Tech 101 - Electrical Connections

OPERATING AND MAINTENANCE MANUAL
Chapter 5 - Installation
TAEevo Tech 015÷802 60 Hz UL
28
The data in this manual are not binding and they can be modified by the manufacturer without notice. Reproduction of this manual is strictly prohibited
ENGLISH
EN
Specific densities table P
5.6 Electrical connections
The machine must be connected to the main power supply in accordance with the laws and regulations in force in the country
of installation, after verifying the wiring diagram annexed to the unit.
Voltage, frequency and the number of phases must comply with the values indicated on the machine data plate.
Main distribution systems in United States:
Main distribution systems in Canada:
% Glycol 0% 10% 20% 30% 40%
Temperature [°C](°F)
-20(-4) 1.0036 1.0195 1.0353 1.0511 1.0669
-10(14) 1.0024 1.0177 1.033 1.0483 1.0635
0(32) 1.0008 1.0155 1.0303 1.045 1.0598
10(50) 0.9988 1.013 1.0272 1.0414 1.0556
20(68) 0.9964 1.0101 1.0237 1.0374 1.051
30(86) 0.9936 1.0067 1.0199 1.033 1.0461
40(104) 0.9905 1.003 1.0156 1.0282 1.0408
System Nominal Voltage Utilization Voltage
120 115 110
240/120 230/115 220/110
600
480
240
575
460
230
550
440
220
480 460 440
480/277
208/120
460/266
200/115
440/254
190/110
240/120 230/115 220/110
240/120 230/115 220/110
System Nominal Voltage Utilization Voltage
240
480
600
230
460
575
220
440
550
240/120 230/115 220/110