OPERATING AND MAINTENANCE MANUAL
Chapter 7 - Electronic controller
TAEevo Tech 015÷802 60 Hz UL
68
The data in this manual are not binding and they can be modified by the manufacturer without notice. Reproduction of this manual is strictly prohibited
ENGLISH
EN
7.34 Alarm log visualization
7.35 Electric heater visualization
7.36 I/O status
Display of temperatures and pressures measured by the probes configured.
Mask Description
Pressing or it is possible to read all stored alarms.
Mask Description
It is possible to read the status of the electrical heaters.
Mask Description
Press or to select the digital input, probes value,
analog output, digital input or relays, then press .
• Probe of the control • Probes Expansion I/O (if configured)
To Next Page
Loading...