MTP 3000 - Environmental and Default Settings

Page 21 of 90
CART WITH IV POLE
PARAMETER SPECIFICATION
HANGERS 2
HANGER CAPACITY 2 – 500cc glass bottles
POLE TRAVEL
64 to 90 inches (measured from the ground to the
bottom of the hanger)
POLE SPEED
2 inches per second
POLE CONTROL
Foot pedal activation or BOTTLE soft-key
4.4 ENVIRONMENTAL REQUIREMENTS
The Model 3000 should be used in a clean environmental that is suitable for surgery.
The following environmental LIMITATIONS are as follows:
ENVIRONMENT OPERATING STORAGE/TRANSPORT
ALTITUDE ≤6,561 feet (2,000 meters) ≤14,000 feet (4,267 meters)
TEMPERATURE 50°F to 95°F (10°C to 35°C) 41°F to 140°F (5°C to 60°C)
RELATIVE HUMIDITY 30% to 85% RH 30% to 85% RH
ATMOSPHERIC
PRESSURE
79 kPa - 102kPa ---
4.5 FACTORY DEFAULT SETTINGS
MODE
F LOW
(cc/min)
VACUUM
(mmHg)
P OWER
(%)
P ULSE
(pulses/s)
FUNCTION
CUT RATE
(cuts/min)
BURST
(%- ms)
O N /O FF
(ms)
IV P OLE
H EIGHT
(in.)
IRR
77
U/S
Normal
24 200 40 0
Linear Power
77
U/S
Burst
24 200 45
Multi Burst
20 77
U/S
Micro
24 200 45
Linear Power
20 / 80 77
I/A
26 460
Linear Flow /
Fixed Vac
84
I/A
Cap
Vac
6 20
Linear Flow /
Fixed Vac
84
VIT
20 120
Linear Flow /
Fixed Vac /
Multi Cut
200 74
COAG
40
Linear Power