MTP 3000 - Recalling a Program; Renaming a Saved Program Without Changing Program Settings

Page 45 of 90
5.9.3 RECALLING A PROGRAM
5.9.3.1 Press the “PROGRAM” DOWN arrow soft-key at the top of the screen, to the right of
the word FACTORY.
5.9.3.2 Scroll down to the desired custom program name.
5.9.3.3 Select the custom program name.
5.9.3.4 The screen should now display the program name selected and all of the parameter
settings and mode functions associated with the program.
5.9.4 RENAMING A SAVED PROGRAM WITHOUT CHANGING PROGRAM SETTINGS
5.9.4.1 Press the “PROGRAM” soft-key at the top of the screen, to the right of the word
FACTORY.
5.9.4.2 Press the “Program Name” you would like to change.
5.9.4.3 Press the “OPTIONS” soft-key.
5.9.4.4 Press the “Programs” tab.
5.9.4.5 Press the “Rename” function soft-key.
5.9.4.6 Use the keyboard “Backspace” key (

) to clear the program name.
5.9.4.7 Use the alphanumeric keyboard on the screen to type in the new 11 character
program name.
5.9.4.8 Press the “OK” function soft-key or the keyboard ENTER (

) key to save the new
program name, or press “Cancel” to exit and not save the new program name.
*: The FACTORY name with its associated Modes and settings cannot be changed.