7.5 COAG MODE (SECTION 5.7)
7.4.1 Install Cautery cord to banana jacks on the side of Model 3000.
7.4.2 On the screen of the console, select COAG mode.
7.4.3 Select Coag power (Fixed, Linear).
7.4.6 Activate the coagulation function.
7.4.6.1 Depress foot pedal to your desired function of the Coagulation mode:
Position (1) for Coagulation.
7.4.6.2 While in any position on the foot pedal, make any necessary adjustments to
applicable parameters as needed by pressing the UP or DOWN arrows:
ARAMETER
ANGE
NITS
7.3.5.3 Fully release foot pedal to end coagulation function.
To Next Page
Loading...