6.2.2 VITRECTROMY HANDPIECE
6.2.2.1 Verify that the irrigation sleeve is installed onto the needle of the Vitrector.
6.2.2.2 Verify that the tubing is in good working condition, free of nicks or cuts.
6.2.3 CAUTERY HANDPIECE
WARNING: Connected accessories should be rated for at least the minimum peak output
voltage of the Model 3000 set at the intended output control setting in the intended operating
mode.
6.2.3.1 Connect the cautery cord to the cautery forceps.
6.2.3.1 Verify that the cord is in good working condition, free of nicks or cuts.
To Next Page
Loading...