XR21S59 CHU 16
1/2018
113813003
Hooklift Multilift XR21S59 CHU
User Manual
Normally automatic mode can always be used during tipping.
Horizontal movement of the XR21S equipment is restricted for safety reasons, i.e. standard
containers won't collide with the equipment on level ground.
As stated before, the user friendly automatic mode should always be used, whenever the
atrack/body length allows it.
Manual mode should always be used in special cases (loading in shallow spaces,
loading a atrack/body on a trailer or a platform).
To Next Page
Loading...