5.3.4 Sensors
You can use the Sensors menu to define or edit sensor names, to configure the
setting and sensor address of the variometer and to switch the vibration alarm on or off.
Overview
5.3.4.1 Variometer
Sink rate
Sink rate of your model.
Possible range: -0.1 m/s to -2.0 m/s
How the variometer tones change from climbing to descending is adjusted
accordingly:
Climbing
High tone; pitch and interval frequency increase proportionally with the climb rate.
Descending
Low tone (hum);
o From "0 m/s" to "Sink rate": pitch and interval frequency are
proportional to the climb rate.
o Below sink rate: continuous low tone without interval.
o From "-3 m/s": no tone.
To Next Page
Loading...
